+8615906071097

How To Select Moulds For Abrasive Aggregates

Nov 05, 2026

How to Select Moulds for Abrasive Aggregates

In concrete block and paver production, the type of aggregate used in the concrete mix has a direct impact on mould wear. Hard materials such as crushed granite, quartz sand, and recycled aggregates can cause faster abrasion than softer, rounded aggregates. If the mould material is not suitable for these conditions, manufacturers may experience frequent replacements, dimensional deviations, and increased production costs.

Selecting the right mould for abrasive aggregates is therefore an important decision for every concrete product manufacturer.

1. Understand the Abrasiveness of Your Aggregates

Before choosing a mould, manufacturers should evaluate the characteristics of their concrete mix.

Several factors influence mould wear:

Aggregate hardness: Hard aggregates such as granite and quartz can accelerate surface abrasion.

Particle shape: Sharp and angular particles create more friction against mould surfaces than rounded particles.

Recycled materials: Recycled concrete and other reclaimed aggregates may contain hard particles that increase wear.

Production volume: High-output production exposes the mould to more repeated contact, vibration, and pressure.

Understanding these factors helps manufacturers select a suitable steel grade instead of relying on a standard specification for every application.

2. Choose the Right Steel Grade

Steel selection is one of the most important considerations when producing concrete blocks with abrasive aggregates.

For standard concrete mixes, 42CrMo steel offers a balanced combination of strength and toughness. However, when the concrete contains sharp sand, crushed stone, or recycled aggregates, a more wear-resistant tool steel may be appropriate.

UNIK identifies Cr12MoV tool steel as an option for highly abrasive concrete mixes. Its wear-resistant properties make it suitable for applications where mould surfaces are exposed to repeated friction from hard aggregate particles.

The selection should also consider production volume, machine conditions, and the expected mould service life.

3. Consider Hardness and Toughness Together

A mould should not simply be as hard as possible. Excessive hardness without sufficient toughness may increase the risk of cracking under repeated vibration and impact.

For its steel moulds, UNIK uses carburizing heat treatment to create a hard surface and a tougher core. The surface hardness can reach HRC 58–62, while the core hardness is maintained at approximately HRC 35–40.

This combination provides two important benefits:

The hardened surface helps resist abrasion from aggregates.

The tougher core helps absorb vibration and reduce the risk of cracking.

4. Check Machining Quality

Even high-quality steel can wear prematurely if the mould is poorly machined.

CNC machining helps maintain accurate cavity dimensions and consistent surface quality. A smooth cavity surface can also reduce friction during concrete filling and demoulding.

For abrasive aggregate applications, manufacturers should pay particular attention to cavity dimensions, surface finish, corner geometry, and the alignment of mould components.

5. Match the Mould to Actual Production Conditions

The best mould is not necessarily the one with the highest hardness or the highest initial price. It is the one that matches the concrete mix, production equipment, and expected output.

Before ordering, manufacturers should provide the supplier with information about aggregate type, concrete formulation, daily production volume, machine model, and block specifications.

Conclusion

Selecting moulds for abrasive aggregates requires careful consideration of steel grade, heat treatment, machining precision, and production conditions. For standard mixes, 42CrMo may provide a suitable balance of properties. For highly abrasive mixes containing sharp sand or recycled aggregates, Cr12MoV tool steel is worth considering.

By matching mould materials to actual working conditions, manufacturers can reduce premature wear, maintain block quality, and improve long-term production efficiency.

Learn more about UNIK concrete block moulds: https://www.unikmould.com/

What Is The Best Steel For Interlocking Paver Moulds?

Send Inquiry